EPISODE 11: UNDERPINNING OUR BASEMENT - RENOVATING MY VICTORIAN HOME

Toronto home renovations - renovating a victorian home - navy kitchen with slim shaker cabinets and la cornue range - la cornue kitchens

Lots of progress has been made sine our last episode including the completion of our navy blue kitchen renovation!

Renovating my Toronto Victorian Home - Episode 11!

What a trip around the sun it has been! This time last year Adam and I were nearing the end of our Toronto home renovations and putting the finishing touches on our Toronto Victorian home. Since then we have moved in, planned our destination wedding, and got married in Tuscany at the beautiful Abbazia di San Galgano Abbey before jetting off on our Croatia honeymoon.

To add a cherry on the figurative cake, Adam and I came back from our honeymoon to find out I was pregnant!

It was a little to early to share our big news with everyone here and on social media, and with Christmas around the corner, we decided to wait to tell our families first before sharing this amazing news with all you.

With that being said, this new discovery motivated us to start preparing for phase 3 (the final phase of our home renovation) - basement underpinning!

home renovation in Toronto - renovating a victorian home - basement underpinning and basement waterproofing toronto - toronto blogs

We had to clear the front yard of our house (which included the removal of our beloved smoke bush) to prepare for phase 3 of our renovation, underpinning the basement. Don’t worry, I have plans to bring the smoke bush back!

What is underpinning?

Underpinning a house is when you reinforce or strengthen the foundation’s structure by excavating small, spread-out, portioned-out sections, before filling them back in with concrete. House underpinning can be required for a number of reason like:

  1. When the original foundation is no longer strong enough to hold the house and is in need of serious repair.

  2. If you want to increase the capacity of the existing foundation to support another story.

  3. To dig out the basement so as to lower the basement floor and achieve a higher ceiling height (as in our case).

How much does basement underpinning cost?

The cost of underpinning varies depending on the state of your current foundation walls, the square footage of your basement, how deep you want to go with the underpin/how much you want to lower your basement floor and how much additional work (i.e. waterproofing, installing radiant floors, main drain replacement/lower, additional plumbing rough-ins) is required.

We received a range of quotes for our basement between $55,000 - $80,000 but in generally, it is said that you should budget for $80 a square foot (as an average) to underpin and dig out your basement two feet.

In order to set ourselves up for success the first thing we needed to do was call our Toronto structural engineer Ken Davis. Having previously worked with K H Davis Engineering on the first two phases of our Victorian home renovation, we knew he was the perfect man for the job.

Toronto blog - home renovation in Toronto - basement renovations toronto - basement underpinning foundation - site visit by Toronto Structural engineer Ken Davis

Our Toronto Structural Engineer Ken Davis doing a site inspection during the underpinning of our basement.

Since 1999 Ken has worked on over 3000 residential projects and has a great reputation for helping homeowners and contractors alike achieve their design and renovation goals. From new builds to additions, laneway home and garden suits, K H Davis Engineering can do it all. He has also worked on many century homes in Toronto, including many Victorian homes like ours, which has provided him with a knowledge base we are always keen to leverage.

A couple site visits and a few measurements later, we were well on our way to finalizing revised plans! In the meantime, we had enough ironed our to start reaching out to contractors that specialize in basement underpinning and waterproofing in Toronto to solicit quotes.


FOLLOW ME ON INSTAGRAM @ISTHATSOH


Toronto home renovations - renovating a victorian home - floating shelves with lights - navy kitchen with slim shaker cabinets and la cornue range - la cornue kitchens

Our kitchen from Domani Design Group is finally complete after the installation of our range vent cover and under floating shelf lighting!

As we waited for underpinning quotes to trickle in, we were able to turn our attention over to finishing off the kitchen.

Since the last episode of our home renovation series we still had two items to check off before the kitchen was FINALLY finished. The first was get our electrician back in to install the last of the lights, and the second was to install the range vent cover. Thankfully we were able to complete both items with a month to spare before Christmas which meant Adam and I could get familiar with our new stove and practice our menu before hosting our family and friends for Christmas dinner. Having now spent a few months putting it to the test, Adam and I are so happy with our kitchen from Domani Design Group. Not only is it beautiful, but very well made. Every door and cabinet is soft close, I have more storage than I know what to do with, the layout is designed with functionality in mind and we absolutely love how much counter space we have!

Needless to say, celebrating our first Christmas at home was absolutely magical. Adam and I splurged on a 9 foot Fraser Fir and rented tables and chairs for our 20 person Christmas dinner. Not only were we able to show off our newly renovated house for the first time to many of our family members, but we were also able to share our pregnancy news with them, which made the whole season even more enchanting.

Following the holiday season, we received a call from our structural engineer Ken Davis to discuss our architectural drawings for the basement. It was concluded after a soil test that we would need to take a hybrid approach to our basement renovation that would involve underpinning about 75% of our basement and bench footing the remaining 25%. Given the sandy consistency of our basement and the fact that our neighbours house on one side is only 6 inches away (and their basement was slighting shorter than our current basement), there was a concern that underpinning that 25% section could undermine our neighbours foundation wall. To ensure everyone’s safety and the integrity of both houses, going with a hybrid underpinning and bench footing approach was the best option.

What is bench footing?


Unlike underpinning where you have to dig under the foundation wall, a bench footing is another way to support a foundation wall and lower the floor in your basement by creating a ledge or ‘bench’ out of concrete that sits along the existing wall. The downside to a bench footing approach is that it encroaches on your usable space. In our case, we have plans to build storage cabinets over-top of our bench footing as a way to not only hide the bench but make use of the space above it.

In addition to the hybrid underpinning / bench footing approach we also decided to turn one of the existing windows into an egress window. This would allow us to have a safety exit, should we ever need it and although we don’t have plans to rent out the basement or put a permanent bedroom down there, it’s good to have in case of an emergency. Given we are in the midst of doing a big renovation as well, there is probably no better time than now to action installing one.

What is a basement Egress window?

A basement Egress window provides a quick and safe emergency exit for your home, and an unobstructed opening from which someone can escape from. This means that a window, large enough for a human body to fit through (see Egress Window Size specifications based on your municipality code) must be able to open from the inside so that an escape can be made via an Egress window well or clearing in front of the window.

Once we were all in agreement regarding the best course of action, Ken was able to submit our architectural drawings to the city and get us our permit within two week! Remarkable!

Toronto blogs - Renovating a victorian home - Toronto home renovations - Basement Renovations and underpinning a house by ICYReno to lower floor in basement - basement waterproofing contractor Toronto

Allow me to introduce our Toronto Basement Underpinning & Waterproofing Contractor - ICYReno! #Partner

Meet our Toronto Basement Underpinning & Waterproofing Contractor

As we waited for our underpinning permit to be approved, Adam and I settled on an underpinning and basement waterproofing contractor in Toronto. Enter ICYReno, a fully insured and licensed waterproofing and underpinning company with over 10 years of experience. Not only have they helped homeowners across the GTA lower their basement floor but they are pros when it comes to interior and exterior waterproofing, back water valve and sump pump installation, drainage systems, concrete work, and more. They also came with an impressive endorsement from our structural engineer who had overseen a few of the basement underpins they had worked on in the past and was impressed by their quality of work. And if that wasn’t enough to seal the deal, their price was also one of the most competitive!

Within a week of receiving our permit, ICYReno began work on our basement. Before they could begin underpinning the foundation, they first had to demo the remaining drywall, stripping back all the layers until it was bare bones. Once complete they divided up the basement into small sections and began excavating and reinforcing each section, pouring new concrete footings before moving on.

Now, two weeks into our Toronto basement renovation it’s clear that ICYReno not only runs a tight ship with well organized bin drop offs and concrete pouring schedules, but their crew is highly trained and hard working. Having completed 50% of the underpin in just two weeks, it’s clear that they need no micro managing and can take care of everything from scheduling site visits with our structural engineer Ken Davis to booking appointments and sharing progress photos with our city inspector. They also sometimes work on Saturday, and given that I’m currently 7 months pregnant and ICYReno promised a 4-6 week timeline for completion, I appreciate their outstanding work ethic! Time is of the essence after all and at this rate they may even be done early! *fingers crossed*


ENJOYING THIS CONTENT? CHECK OUT SOME OF MY PREVIOUS EPISODES & BLOG POSTS!


Meanwhile, I have been gathering inspiration for the basement. Given that we have to move our upstairs office into the basement to make room for our future nursery, we plan to divide the basement up into three major sections, a closed off front office that could double as a spill over bedroom should we need it, a larger open concept recreational room with a wet bar and perhaps a small play area where we can attempt to keep all the kids toys contained, and a conjoined bathroom-laundry room at the back where we can finally install our washer and dryer (which have been sitting in our living room for almost a year now)! YAY!

FUTURE FINISHED BASEMENT INSPIRATION

A few additional things we were able to check off our ‘To Do’ list since the last episode was install some new light fixtures on the main floor, finish off the powder room, make progress on the upstairs hidden linen closet and order new windows for the basement.

Next up on our list of things to tackle: prep the nursery for the baby’s arrival (I have plans to install a feature mural on one wall and paint the other walls), finish the underpinning, rough-in drains for the basement bathroom/laundry room and wet bar, install weeping tile and complete interior basement waterproofing, install radiant floors, dig and landscape for a new basement egress window, pour a new concrete slab floor and install a new basement egress window. Hopefully while this is all happening I can also source some tiles for our future basement bathroom!

Toronto blogs - Renovating a victorian home - Toronto home renovations - Basement Renovations and underpinning a house by ICYReno to lower floor in basement - basement waterproofing contractor Toronto

Basement renovation in progress….

Although Adam and I are not putting any pressure on ourselves to finish the basement before the baby arrives, it would be nice to have it as a functional space to work from and do laundry in. As much as I love visiting my parents every weekend to do laundry, it’s only going to get tougher once a newborn is in the picture. Anyways, that is all I have to share with you in this episode and blog post. If you have any questions about renovating a Victorian home, what it’s like to live in Toronto or need recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to K H Davis Engineering and ICYReno for partnering with me on this project. I’m so excited to be working with such reputable companies on our Toronto basement renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,
- Soheila



MORE BTS PHOTOS FROM THIS EPISODE


PIN THIS POST

Home renovations in Toronto - A Toronto Victorian Home - kitchen renvovation reveal and underpinning foundation in basement

EPISODE 10: IT'S FINALLY HAPPENING - RENOVATING MY VICTORIAN HOME

Toronto home renovation - victorian style house - winckelman tiles - victorian mosaic tiles with Border design - bathroom renovations in Toronto - powder room ideas

We finally installed the Victorian mosaic tiles I ordered from Winckelmans in the powder room!

RENOVATING MY TORONTO VICTORIAN HOME - EPISODE 10!

I know it’s been a few months since I last released an episode of my home renovation series but that is not because Adam and I have been relaxing and enjoying the summer, quite the contrary! Since moving back into the house and getting ourselves settled in, we have had to put our bigger renovation plans on the back burner and switch gears to concentrate on planning our wedding and getting married in Italy!

If you missed our big news, this past September Adam and I got married in Tuscany at the beautiful San Galgano Abbey. We kicked off our trip with a whirlwind weekend in Florence with friends before heading to Tuscany to check into our wedding villa where we would be hosting the majority of our wedding event. On the first night we hosted a large welcome dinner under the stars for all our guests before getting married the following day in front of all our family and friends. It was such a beautiful wedding and reception - a total dream come true! After one week in Italy, Adam and I headed to Croatia for our honeymoon where we spent a few days at a luxury boutique hotel in Hvar before sailing around to a few Croatian islands and finishing up in Dubrovnik for the last couple nights.

modern victorian house - home renovations toronto - foyer tiles - winckelman tiles black and white victorian tiles with boarder design

My dreams of having Victorian Tiles in my house have finally come true!

Installation of My Victorian Mosaic Tiles From Winckelmans Tiles

Before leaving for our wedding, we were able to get a few things off our to-do list including the installation of our new Victorian mosaic tiles from Winckelmans Tiles that we had previously picked up from their distributor in Toronto, Deco Tile.

It felt so good to finally have my tiles from Winckelmans installed! Adam’s dad ended up helping me with the foyer install (making sure to add in some Schluter Ditra lining for extra waterproofing protection) while Duran from DuWolf tackled the powder room to ensure we could get both spaces done before we left. Although the sheeted tile format (which my Winckelmans Tiles came in) does make the installation process easier, it still takes a lot of thoughtful planning to make sure everything lines up properly and is measured and cut perfectly, so the install is no easy feat! In the end, both spaces turned out even better then I or Adam could have imagined and the black and white Victorian tiles with a matching boarder design turned out super sophisticated/elegant. I love how when you walk into the house the foyer plays off the black and white staircase in the background too which makes the whole entrance way feel cohesive and inviting.

There is still a lot of work we have to do to the powder room following the tile install on one of the walls and floor but I can already tell it’s going to look great once it’s done and the custom Victorian stained glass window I’m having made is installed. Stay tuned for the final look in the next episode!

Toronto home renoation - arched wine cabinet with fridge - compact wine fridge - at home bar cabinet with coffee nook - victorian cast iron radiator and herringbone floors with brass inlay

Our arched bar with wine storage is looking better than ever!

Installation of Our Wine Cabinet With Fridge for Our
Home Bar & Coffee Nook

Another job we were able to check off our to-do list before heading to Italy was the installation of our little arched bar/coffee nook!

Do you remember back in episode 6 when we started drywall and framed out an interior archway for a future little bar area with wine cabinet and wine fridge? Well the custom cabinetry we had ordered was finally ready for install! I went for a super simple design that played off the kitchen’s navy blue palette by having a small cubby with slanted shelves (perfect for storing wine bottles) made with a small drawer on top to hold bottle openers etc. We used the left over Calacatta Gold porcelain from the kitchen for a counter top and duplicated the natural oak shelves to add additional storage for liquor bottles and bar paraphernalia. All we had to do once the navy blue bar cabinet and shelves were installed was plug in our new dual zone wine fridge and Nespresso machine, and decorate! Adam and I saved a whole case of wine from our wedding that we are planning to stash away and open on future anniversaries so I’m really happy to have a nice space to store them. Not to mention a little area separate from the kitchen to mix cocktails for guests while hosting over the holiday season!

DID YOU KNOW the perfect wine fridge temperature ranges between 50 °F (11°C) and 65 °F (18°C) for red wine and 45 °F (7°C) and 50 °F (11°C) for white wine. Neither did I, I had to look it up. Also, needing to rotate your wine bottles every few months is a total myth. As long as they are stored on their side you’re fine! Learn something new every day! Haha!

Victorian homes - toronto home renoations - restoration of victorian windows - house restoration

The plastic sheet draped over the front 2nd floor windows was becoming a huge eye sore!

Restoration of Our Original Victorian Windows

If you’re new to my channel or blog you might have been wondering why there is a big plastic bag draped across the front second floor window of our house. Well, do I have a nightmare story for you!

The evening before Adam and I were set to start drywall there was a massive rainstorm that called our attention to the badly deteriorated and rotted state of our 2nd floor windows. The water from the rainstorm was just pouring into our main floor front room and with drywall starting the next morning, we had no choice but to temporary fix it by draping a large plastic sheet of vapour barrier over the 2nd floor window as a way to keep water off of it as much as possible. This temporary solution worked very well. Amazing actually! The leaking instantly stopped but living with a large plastic sheet on the front of our house was a huge eye sore I was getting sick of looking at. So when Adam and I got back from our wedding and honeymoon, I called our carpenter and asked him to come work his magic.

Restoration of our front windows took a couple days but our carpenter quickly identify the obvious culprit. He started with removing all the rotten wood before replacing it with new wood and sealing any remaining gaps around the edges with spray foam. He did a great job replicating the original Victorian trim work and mimicking the original style just as I asked, and even primed the window with some primer paint to seal it in preparation for painting and a fresh outline of caulking.

It felts so good to not only get that plastic sheet off the front of our house but checking this off our to-do list gave me the reassurance I needed to feel confident that this window will no longer be a problem moving into the winter months.


FOLLOW ME ON INSTAGRAM @ISTHATSOH


Toronto home renovations - victorian homes - exterior house painting and restoration - victorian house gable restoration - exterior window trim painting

Giving the front of our house a little refresh!

Exterior Painting of Windows, Gable and Trim

After our carpenter wrapped up his work, Ariel and his painting crew came in to sand down and paint the front windows, gable, balcony and trim before sealing the windows off with some fresh caulking. Originally the gable, windows and trim was this dull grey colour and our front door and balcony spindles were black but none of it did anything to bring out the beautiful orange hue of the brick. I wanted something complimentary, that helped the house stand out and appear vibrant and glorious in its old age, and what better choice for that than orange’s most complimentary colour, blue! It’s my favourite colour after all!

So off I went to the paint store, with one small kitchen cabinet door tucked under my arm to find the perfect matching colour! Imagine my shock then to find out there is no Benjamin Moore colour that matches! The gentleman at the store ended up mixing the paint colour by eye and after a few small tweaks, we landed on the perfect formula! Thank god for paint snobs!

Now that the windows are restored and everything received a fresh coat of paint, the house is looking really sharp! I love how the navy blue paint accentuates the rich orange hue of the brick and how it changes colours (it sometimes almost looks black) depending on what time of day it is. To help underscore the navy blue trim we kept the front door, cast iron railing, 2nd floor balcony and eves/drain spouts black as a way to emphasize the difference in colour despite the navy appearing black at a quick glance.

Toronto home renovations - victorian homes - custom victorian stained glass window for powder room

Louis stopped by to drop off the completed stained glass window I had her custom make for my powder room!

My Custom Victorian Stained Glass Window Was Delivered!

Prior to leaving for the wedding, Louis had invited me to her studio in Etobicoke to finalize the design of the custom stained glass window she was making for the powder room. It was so cool to visit her studio and learn more about the stained glass classes she offers. The pieces she was working on for me looked incredible and exactly like the mock up design I had drawn for her months earlier. During my visit she showed me some final jewel options and glass colours she had selected, and asked me to choose what I liked the best before she began the welding phase of the production.

A few weeks later, while Ariel was still painting the house, Louis stopped by to drop off the finished stained glass window! IT LOOKED SO GOOD and I was so happy to see it installed and in all its glory in the powder room!


ENJOYING THIS CONTENT? CHECK OUT SOME OF MY OTHER EPISODES AND BLOG POSTS!


Home renovations Toronto - victorian homes - la cornue ranges - kitchen renovations toronto - herringbone floors with brass inlay - navy blue kitchen cabinets

Our La Cornue Cornufé range was finally installed!

Installation of Our La Cornue Range

It finally happened! After months of waiting for our new vent to arrive, two weeks ago we were able to get not only get it installed but we got our new La Cornue range installed too!

Originally, Adam and I had planned to have our stove installed in May when we moved in but the inspector saw the hole for the vent exhaust and said it was too big and not to code. Pivoting as best we could, we ordered a new vent that required a smaller exhaust hole but the kicker was we had to wait 16 weeks for it to arrive. In the meantime our new La Cornue stove lived in its crate in our dining room while Adam and I cooked all our meals on the BBQ.

After months of waiting our new vent arrived and we had our kitchen cabinetry maker from Domani Design Group come in to retrofit our range hood cabinet (because of course the new vent had to be a different size than our old vent) before having a professional appliance installer come in to finish the rest of the install.

By the way, if anyone is doing a kitchen renovations and needs a vent, we still have our old, unopened, Elica vent available for purchase! Model number is EAR140S4 if you want to check out the specs!

Now that our La Cornue stove is installed, Adam and I have been cooking up a storm. We love the duel electric ovens and powerful gas range. We also later learned that they discontinued making the La Cornue Cornufé range in the navy blue colour so it’s not even available for purchase anymore which makes me love it even more. I’m so excited to continue to play around with it over the holidays and feel way more confident about hosting family and friends for dinner now that we are not limited to just the BBQ. It’s going to make things so much easier and more enjoyable not to mention it looks like a piece of jewellery!

Overall, I am ECSTATIC about all the progress we’ve made on the house since moving back in. I even bought some lights on Black Friday which I can’t wait to arrive so I can install them! Christmas is also around the corner and I’m looking forward to getting our first Christmas tree and starting to host our friends and family for drinks and dinner.

Toronto home renovations - underpinning the basement - before

The current state of our basement - a sandbox!

2024 Plans: Tackling the Basement & Underpinning

In the new year Adam and I have plans to start tackling the basement which is currently a large sandbox. We want to do a big underpin in hopes of achieving an 8+ foot finished basement so it’s a bit more of a functional space and we can actually install our laundry machines (which is the last thing we need to install)! Until then they will continue taking up space in our living room. YAY! * eyeroll *

In preparation for the underpin (and before the ground froze) we had to cut away the bushes and smoke tree out front. Having to get rid of the smoke bush tree broke my heart, I loved that tree! Unfortunately it was so old, overgrown and wild that it produced less blooms each year and blocked all the light making it impossible to grow anything else. We have plans to re-landscape the front in the spring after the underpinning is done but for now we needed to prepare that front area for a demo bin.

Toronto home renovations - victorian homes - exterior window trim painting

The house after window restoration work and a fresh coat of black and navy blue paint!

Thank you so much for joining me today and for checking out my new Toronto home renovation series on Youtube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian house renovations, what it’s like to live in Little Portugal, Toronto or recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to Winckelmans Tiles and Deco Tile for partnering with me on this project. I’m so excited to be working with industry experts on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila

MORE BTS PHOTOS FROM THIS EPISODE


PIN THIS POST

Home renovations in Toronto - A Toronto Victorian Home - black and white victorian mosaic tiles from Winckelmans - powder room makeover

SPILLING TEA: ALL MY JUICY RENO PLANS & INSPO!

My Romanesque style Toronto Victorian home


It’s been almost six months since we moved into our Toronto Victorian Home and yet waking up and walking from one room to the next still feels so unreal sometimes. The spark we first felt when we initially toured the house is still very much alive and it all just goes to show that our crazy first time home buyer experience was worth the struggles. In the end, we found a beautiful house in a great neighborhood that we have been loving learning more about and exploring.

OUR CREEPY HIDDEN STAIRCASE

Being over 125 years old, our Romanesque style Victorian home does come with its fair share of quirks. For one, we discovered a creepy hidden staircase in a wall while planning out our main floor renovations! We suspect it was closed off to hide plumbing to the second floor bathroom and make room for a new staircase to the basement, but given it features the same high baseboards you see in other parts of the house, the staircase was likely part of the original house.

Additionally, when we bought the house we noticed that the floors sagged. This is a common characteristic of old houses usually equated to their age, but upon further inspection by our structural engineer, we began to suspect that load bearing walls in the basement had been removed by a previous owner at some point. Thankfully the foundation of the building is sound and our renovation plans will address this issue.


FOLLOW ME ON INSTAGRAM @ISTHATSOH


One thing I am 1000% doing is preserving the historical charm of the house as much as possible. Both the entrance way and drawing room feature high baseboards and crown molding centered around exquisite Victorian ceiling medallions. I also love the original ornamental molding that can be found throughout the first floor that embellishes the doorways including the main entrance. Unfortunately, a lot of these decorative molding features have been removed from the second floor, so one thing I’m definitely including on my ‘to do’ list is custom mill work to incorporate it back in.

Speaking of ‘to do list’, the reason why I am sharing today’s post is not only to expand on my pre reno tour, kitchen appliance tips, and share interior design inspiration for my upcoming renovations but it’s also to introduce a new Youtube series I’m going to be filming, documenting our renovation journey! I feel like this house and first floor renovation is going to be an amazing opportunity to share about my love for design and create entertaining content to excite you. There no doubt will be challenges but it’s in those challenges that great stories are made so I hope you will join me on this journey.

Of course, by way of this blog post I also wanted to give you a sneak peak into all the beautiful inspiration I’ve been collecting, what we are planning, and why we called in a structural engineer to help us. SPOILER: it goes beyond sagging floors!


RENOVATING A VICTORIAN HOME

Given our budget after buying the house and the fact that it is currently split into two units, Adam and I decided the best way to approach our top to bottom renovation is to split each floor into phases. This way, we can continue to live in the house during the renovations while still having a working kitchen on the second floor.

As you have probably guessed by now, phase one of this project is going to include a complete first floor renovation. Structural changes to support this, including widening the staircases on both the main and lower floor, will also be taking place as well as reintroducing an entrance way from the front hallway into the drawing room and removing unoriginal walls to create an open concept layout towards the back of the house where you will find a new kitchen, powder room, and bar. The sun-room at the back of the house will eventually be demolished so as to reclaim more of the backyard and a larger door opening will be created to replace it allowing for maximum natural light.

I will be elaborating further about these design choices throughout this blog post as well as providing inspirational images to help you visualize what we are planning. So without further ado, let’s start with diving into each element our renovation plan starting with structural changes.


STRUCTURAL CHANGES

I knew prior to starting our first time home buying journey that I loved Victorian homes so while on our quest we visited many renovated Toronto Victorian homes. A common repeated feature we noticed was an open concept layout on the first floor which, when paired with high ceilings, not only made the house look bigger but grander! Since original walls only seem to exist at the front of our house, Adam and I had no hesitations when deciding to alter the main floor layout by removing walls to make room for a larger kitchen and overall entertaining space. We learned that making these layout changes would require additional steel beams to provide stability and prevent structural issues that could arise later in the other phases of our renovations.

Additionally, since we wanted to demolish the sunroom and reclaim more backyard space we saw this as an opportunity to install a larger opening for a new doorway leading to the backyard. Doing this would require a steal frame to be installed to support the brick wall at the back of the house.

Pre Reno Kitchen and Sun Room - Photo Cred Raffi Tutundijan @jaggedlens

CRITTALL STYLE DOORS

Originally, Adam and I were thinking of doing a large steel Crittall style doors as the back entrance door, however after pricing it out and seeing what the lead times would be to have one made big enough for the opening (it would have to be custom made) we got cold feet.

Living in a cold climate, steel Crittall doors aren’t known for being the most energy efficient door systems since they aren’t great at preventing heat from escaping or blocking the cold from coming in. The Toronto Building Code does have a minimum thermal break requirement for all external doors which is why aluminum doors or fiberglass doors are more common (they offer superior energy efficiency when compared to steel) as well as cheaper. Alas, we are still undecided which way we will go but here’s some inspiration of what we are thinking.


ENJOYING THIS POST? CHECK OUT SOME OF MY OTHER RECENT LIFESTYLE POSTS


Further, it wasn’t until we moved in and tried to get furniture to the second floor and basement that we realized how narrow our staircases are! When it comes to staircases, Toronto’s current building code requires staircases in new builds to be a minimum of 36 inch wide. Historically, staircases were never this wide and although our staircase is not original, the opening was never widened by a previous owner. Our staircase comes in at 27 inches making it extremely hard to fit assembled furniture upstairs. For the longest time Adam and I wracked out heads trying to figure out how the previous owners managed to get the kitchen appliances up to the second floor. It wasn’t until we finally measured the width of the doorway to the small front balcony off our master bedroom that we figured out they must have removed the door temporarily and craned them in through the small balcony! Crazy right!? One of the biggest and possibly most pivotal decisions we had to make when putting together our renovation plans was figuring out whether we were going to address our narrow stair issue, how it would impact the structure of the home, and how much widening and replacing both staircases would be.

WOOD STAIRCASE DESIGNS

After finally deciding to move forward with widening the staircases, Adam and I debated whether to go more modern or keep it classic with the new stairs. We both love the look of floating stairs but given how much traditional character the house has, we ended up going for a more traditional design. But I’m sure we will add a modern twist somehow.

Lastly, structural issues in the basement that caused the floors on the main level to sag needed to be addressed before we can lay down a new subfloor and install new floors. To do this it seems that a few new beams will have to go in on the lower level - especially at the front of the house - to ensure the new floors won’t buckle a few years down the road. Installing these new beams will be also help us address the issues on unsupported over-spanned joists that we believe were caused by the removal of a load bearing wall in the basement by a previous owner.

Speaking of floors, I’ve been obsessed with mosaic and herringbone floors for years! Prior to buying a house, I told Adam that I hope whatever we ended up with needed new floors so I would have an built in excuse. During our viewings we saw a few Toronto Victorian's with mosaic and inlaid floors that only continued to fuel my obsession.


CURRENT FLOORING

Currently, the main floor has three different types of flooring going on, one of which does look original. However, it’s only a small section at the back and they aren’t in the greatest shape. If there was more of it and it was in better shape I may reconsider redoing the floors, but in our case this is one ‘out with the old in with the new’ sacrifice I’m willing to make. Traditionally herringbone floors were made of oak and these days you can get them in engineered oak in many different sizes and colours. Narrowing it down to a size was exceptionally hard given the size of the space. Too large and you don’t notice them, but too small and it’s all you notice. It needs to be balanced! In the end we went with a 90 mm natural oak herringbone colour which I am so excited about. It’s going to add warmth back into the space and match beautifully with what we have planned for the kitchen. I can’t wait!

HERRINGBONE FLOOR INSPO

I’ve shared a little bit about the kitchen appliances we ordered a few months back but when it comes to designing my dream kitchen you can bet it won’t be all white! In order to ensure flawless execution for this part of the project, I brought in the big guns, Domani Design Group. Not only does Domani distribute luxury European brands like Pedini but they also specialize in custom cabinetry for both kitchens and bathrooms as well as custom millwork! Just what I needed!

To us, the kitchen is truly the heart of the house and both Adam and I love to cook and entertain. With 10 foot ceilings and an open concept layout, I wanted the kitchen to feel airy but still anchoring, warm and full of natural light. Currently we have two big beautiful windows in our hallway that we plan to position the island between. For cabinetry we are keeping it simple, timeless, and classic but modern with a shaker style kitchen in a dark French navy to match our La Cornue range in the same colour with brass accents. The La Cornue range is going to be the centrepiece so I wanted cabinetry to compliment it, but not compete.

SHAKER STYLE KITCHEN INSPO

A warm porcelain countertop in a Calacatta with brown-gold warms up the space and plays on the natural oak herringbone floors. Floating shelves in a cool natural wood surround a simple and understated range hood which extends all the way to the ceiling to accentuate the height of the room. Bar seating will surround the kitchen island sink. I have even gone so far as to start to think how I will organize the kitchen and have submitted special millwork request to Oscar at Domani including a pull out spice rack and cabinet pull out drawers for my small appliances! I’m so excited!


KITCHEN STORAGE & ORGANIZATION IDEAS


I obviously don’t expect this renovation to go smoothly. I’m actually banking that it’s not so that I have some great stories to come back and share, but I am super excited for all that is to come. I’m also super excited to document and create my Youtube series around it so you guys can get a sense of the process too! If you aren’t following me already make sure to subscribe to my YouTube channel and follow me on Instagram for updates on this phase 1 renovation and more design projects I have in mind!


PIN THIS POST

TIPS FOR PICKING THE BEST KITCHEN APPLIANCES!

Best Kitchen Appiance Brand

Want to hear a funny story?

When Adam and I moved into our Toronto Victorian home, so many appliances didn’t work.

The washer and dryer were both broken, my dishwasher was a glorified drying rack, my freezer was frozen shut. At one point, I opened the island cupboard and the door completely came off in my hand. The previous owners didn’t even put screws to attach the hinge! It was comical!

We knew the house needed work when be bought it but I didn’t expect our appliances to be in such bad shape when we moved in. Thankfully, Adam’s response to this series of unfortunate events was to give me the green light to start planning an entire first floor renovation which, if you haven’t already guessed, included a new dream kitchen and a slew of new appliances.

KITCHEN INSPO

Now, something you should know about Adam is that he loves to cook as much as I do so designing a ‘chef’s kitchen’ and upgrading the range was a must for us. This meant I could splurge on a gas range with high BTU’s and a large electric oven but didn’t need nor want to go for expensive designer brand appliances for everything. As a matter of fact, if there is one thing I learned from the research I did comparing price to function to design for each appliance, it’s that there are tons of really beautiful, sleek appliances out there with great consumer reviews at palatable prices. You don’t need to spend $17,000 on a fridge to have the best kitchen appliances, trust me.

Fast forward to today and your girl has ordered all of her appliances! Since I know first hand how grueling the process of picking appliances can be, I though i’d come back and share a few tips for purchasing appliances, what I found to be the best brands for each appliance category (research backed) and what I ended up purchasing!


FOLLOW ME ON INSTAGRAM @ISTHATSOH


TIPS FOR PICKING THE BEST KITCHEN APPLIANCES

TIP 1: FIGURE OUT YOUR NEEDS & BUDGET

If you are looking to buy the best kitchen appliances my first piece of advice would be to figure out your needs and budget before visiting showrooms, and doing your research. Appliances come in a range of prices and designer brands like Sub Zero and Wolf, La Cornue, Miele, Bosch, and Thermador offer super sleek designs with superior functionality but can come with a hefty price tag.

On the other hand, brands like LG, Samsung, Kitchen Aid and GE are considered more affordable and offer a larger range of products with great ratings at decent prices. These more affordable brands still offer great appliances with good capabilities but they tend not to have as many bells and whistles as the designer brands and aren’t as ‘sleek’; although they have gotten way better in recent years!

Adam and I ended up giving ourselves a healthy budget for kitchen appliances knowing that we wanted to splurge on a designer duel range while also still needing a new microwave, dishwasher, fridge, hood vent, washer and dryer. We also knew mixing and matching designer appliances brands with non-designer brands would help us keep our cost down significantly while still allowing us to build our dream kitchen with the best kitchen appliances.

Kitchen Inspiration - Sourced from Pinterest

TIP 2: PICK WHICH APPLIANCE TO UPGRADE

Once you have outlined your needs and budget you can then pick which appliance you feel you would benefit the most from upgrading (if any). Do you hate doing dishes? Perhaps a high performance dish washer will be the most beneficial. Do you love cooking and need a stove with high BTU’s for searing? Perhaps a designer range is the item you should splurge on. Do you have a big household and need a larger fridge or freezer to accommodate all the groceries you buy? Asking yourself these questions will not only help you pick the right appliances, but will also help you narrow down budget allotments for each appliance.

SINGLE VS. DUEL RANGES

One thing I learned while visiting showrooms for the best kitchen appliances is that designer ranges tend to offer higher BTU’s than more affordable brands. Additionally, many designer brands also offer duel systems meaning you can have a gas range AND an electric oven. The benefit of having an electric oven is that the temperature for baking is more accurate and even compared to gas because the temperature is measured using inferred in gas ovens, making temperature harder to control and less accurate relative to electric. However, when it comes to the range, gas allows you to cook at higher temperatures and brings things to a boil faster than electric. For this reason, duel ranges tend to be more expensive than single ranges and since this was the kitchen appliance Adam and I decided to splurge on we allotted the largest proportion of our budget to it.

A La Cornue ConfuFé 110 duel range in white with brass trim

Although Sub Zero Wolf, Thermador, and Miele all offer great gas ranges, I fell in love with the look and capabilities of the La Cornue CornuFé 110. The range itself features 5 powerful burners - one 17,500 BTU central burner, three 12,000 BTU burners, and one 6,000 BTU burner for simmering; two electric convection ovens - one of which is a seven mode multifunction oven; and one large storage drawer. We ended up going with the classic French dark navy blue with polished brass trim accents which we plan to build the rest of the kitchen around. It’s like a piece of art you can cook with! Adam will have the searing power he loves and desires while I will have the two electric ovens for optimal non-stop baking. I can’t wait!

TIP 3: GET CONSUMER REPORTS

Once you have figured out your budget and what appliances you would benefit most from upgrading, I would highly recommend going online to Consumer Reports to check out the rankings and reviews for each appliance category you are interested in. Doing so will help you narrow down which brand is making the best kitchen appliances for that specific category and make choosing the right one for you less overwhelming. I love going to this website when purchasing any electronic or kitchen appliance because it ranks its performance, its reliability, how environmentally friendly it is and the overall customer satisfaction with the product.


CHECK OUT THESE OTHER LIFESTYLE & HOME DECOR BLOG POSTS!


I turned to Consumer Reports for help choosing the remainder of the appliances and that’s how I ended up going for another designer brand appliance - the stainless steel Bosch Ascente SHX3AR75UC dishwasher. The reviews for this dishwasher were amazing and the price was surprisingly reasonable for a designer brand appliance. According to consumer reports, Bosch makes great, high performance, reliable dish washers with great load capacity that are super water and energy efficient. After watching a few review Youtube videos and seeing how well it ranked, going with the Bosch Ascante was a no brainer. In addition to Bosch, Thermador also rose to the top as one of the best kitchen appliance brands in the dishwasher category according to Consumer Report rankings.

TIP 4: GO INTO THE SHOWROOMS

After doing your research and narrowing down which brands make the best kitchen appliances in each category, you should then go into the showroom and check them out in person. Doing so will help you visualize what your kitchen will look like and help you narrow down the features and visual aesthetic you want to go for. I actually learned a lot more about fridges by doing this including the difference between ‘counter depth’ and ‘cabinet depth’.

MORE KITCHEN INSPO

COUNTER DEPTH VS CABINET DEPTH

One of the biggest differences between designer brands and non-designer brands (other than the massive price difference) was that designer brand appliances come in ‘cabinet depth’ whereas non-designer brands tend to be ‘counter depth’ or deeper. This means that designer fridges are shallower in depth and look more seamless or flush when installed alongside cabinetry. I also noticed that designer fridges tend to be taller then non designer fridges and the compressors usually don’t eat into the freezer space as much as non designer fridges. Just something to think about…

Although important, a designer fridge was not something Adam and I thought we needed to splurge on (they can go beyond $17,000). This, in addition to not being fussed about it sticking out beyond the counter by three inches or not having extra height (finally it pays to be short), we decided something more budget friendly would suit our needs and aesthetic which is why we started looking at non-designer French door fridges.

Three Birds Renovations - Kitchen Inspiration - Sourced from Pinterest

To my surprise and after further research, I learned that LG actually outperformed many of the designer brands when it came to overall customer satisfaction. Although their fridges may not be as tall or shallow as a designer fridge, LG makes great, energy efficient fridges that have temperature uniformity and are reliable. Adam and I ended up choosing a counter depth french door LG (LFCC22426S) fridge in stainless steal which not only matched our Bosch dishwasher quite well but performed really well against other top non-designer brands in this category like GE, Samsung and Kitchen Aid, in addition to designer brands like Dacor, Thermador and Jenn-Air.

TIP 5: MATCH AS MUCH AS POSSIBLE

My last tip for picking the best kitchen appliances for you is to try to make your appliances match as much as possible. This will add a cohesiveness to the space and make it look more visually appealing. You can do this easily by picking all stainless steal appliances, by going with the same brand for everything, or by choosing appliances with similar looking handles. Adam and I chose to get everything in stainless steel to make matching them together easy and lucked out with our fridge handles matching our dishwasher handle despite being from different brands.

Further, for our washer and dryer, we ended up going with matching LG units because not only does it give a cohesive look but the reviews were really great. LG recently came out with new front load washer (LG WM4500HBA) and electric dryer (LG DLEX4500B) with 5.8 cubic feet load capacity - the largest yet. It got a 5/5 for washing performance, energy efficient and water efficiency and can easily be stacked on top of one another if you want to eventually put it in a closet like us.

Lastly, for our microwave, we wanted to have something that looked built in so we went with the Panasonic NNST663SC and added on a stainless steel trim kit so it would match our other appliances. It was more expensive than what I expected a microwave to cost but Panasonic as a brand performed well in this appliance category especially when it came to defrosting evenness, speed of heating and overall reliability. Other brands that performed well in this category include GE and Oster.


So there you have it! My tips for choosing the best kitchen appliances and recommendations for kitchen appliance brands in each catagory. I know figuring out what appliances are reliable and high performing can be a daunting/grueling process but the last thing you want to do is spend your hard earned money on complete crap that has to be replaced in a few years. I hope this blog post helped you along a little bit and provided additional knowledge on the differences between designer brands and non-designer brands, as well as which brands are performing the best in each category. Feel free to share what appliances you ended up going with below too! I would love to know!


PIN THIS POST